|
|
|
|
|
This page allows you to add burden to the cost elements. . You can select the burden basis. You can view the burden element and the associated element description. You can also enter the burden factor either as ‘Flat’ or ‘Percentage’. The system creates the cost burden based on the burden factor and the burden basis.
Select the “Additional Cost Burden” link at the bottom of the “Perform Rollup” page.
The “Additional Cost Burden” page appears.
The system displays the following:
|
Request ID. |
The number identifying the request of the rollup. |
|
Status |
The status of the request. |
|
Valid From Date |
The date on which the rollup is valid from. |
|
Item Org. Unit |
The organization unit where the costs are mapped to the login OU in the CIM. |
|
Include Scrap Factors |
The values showing whether the scrap factors are included. |
|
Cost Type |
The type of the cost. It could be the values predefined and taken from the “CSET Component”. |
|
Rollup Option |
The type of rollup option in which the rollup was done. It could be “Single Level” or “Multi Level”. |
|
Process |
The process where the exception occurred. It could be “Explosion”, “Process Costs Calculation”, “Rollup” and “All”. |
Enter the following field:
|
Burden Basis |
Use the drop-down list box to burden basis of the cost element. You can select from “Flat” and “Percentage”. |
The system displays the following:
|
Burden Element |
The code identifying the burden element. |
|
Desc. |
A textual description of the burden element. |
Enter the following field:
|
Burden Factor |
The burden factor of the cost element. If “Flat” is selected in the “Burden Basis” then a flat amount should be entered. If “Percentage” is selected then a percentage amount must be entered. |
Click the “Create Cost Burden” push button to create the cost burden.
The system saves the values and creates the cost burden on the cost.
To proceed, carry out the following
Select the “Attach Notes”link to attach any notes regarding the rollup.
