Viewing parameter values

This page allows you to view the parameter values for the selected equipment or location. Tell me more.

Select the “View Parameter Values” link in the “Select Equipment/Location” page. Alternatively, select the hyperlinked equipment or location in the multiline of the same page.

The “View Parameter Values” page appears.

Enter the following fields, if you wish to view the parameter values for an equipment / location other than the equipment / location selected in the previous page.

Update On	Use the drop-down list box to specify whether you wish to view the parameter values of equipment or location. The system provides the options “Equipment” and “Location”. The system displays “Equipment”, by default.
Code	The identifier of the equipment or location for which parameter values must be viewed (Alphanumeric, 30).
	Press <Enter>. The system displays the description of the equipment or location alongside.
	Zoom facility available.

The system displays the following fields in the “Parameter Values” multiline:

Parameter	The parameter of the equipment or location.
Inspection Point	The inspection point on the equipment or location where the parameter is measured.
UOM	The unit of measurement of a consumption or range parameter.
Date	The date on which the parameter value was updated.
Time	The time at which the parameter value was updated.
Parameter Value	The current value of the parameter.
Reported By	The employee ID of the user who updated the parameter value.
Remarks	Any additional information about the parameter value.
Parameter Type	The type of the parameter, which can be “Consumption”, “Attribute” or “Range”.
Update Mode	The mode in which the parameter was updated. The system displays any one of the following:
	Direct Update – If the parameter is updated manually.
	Direct Update On <Parameter> - If a consumption parameter is updated, when the parameter to which it is related to by a formula, was updated.
	Update On <Equipment> - If a consumption parameter was updated when the same parameter of this equipment was updated.
	Update On <Equipment + Parameter> - If a consumption parameter was updated by a formula which is in turn related to the updation of the equipment parameter.
	Update On <Inspection Point + Parameter> - If a range parameter was updated by a formula that is related to the parameter that was being updated.
	Meter Reset – If a consumption parameter was updated by a meter reset.
	Meter Reset On <Parameter> - If a consumption parameter was updated when the meter was reset for a parameter, to which this parameter is related by a formula.
	Meter Reset On <Equipment> - If a consumption parameter was updated when the meter was reset for a parameter of the equipment.
	Meter Reset On <Equipment + Parameter> - If a consumption parameter was updated when the meter was reset for the parameter of the equipment, to which this parameter is related by a formula.
	Amendment – If the parameter is updated by an amendment of the parameter value.
Transaction No.	The number of the inspection order, amendment or meter reset through which the parameter was updated.
Formula	The formula, if the source of the parameter from which it is updated, is “Formula”.

Click the box in the “Select” column of the multiline, to select the parameter for which you wish to view the affected parameters.

To proceed, carry out the following

Select the “View Affected Parameters” link from the bottom of the page to view the affected parameters.

Viewing parameter values – An overview

This page allows you to view the parameter values for the selected equipment or location. You can view the following details of the parameters:

The parameter and its type
The inspection point on which the parameter is measured
The unit of measurement of the consumption and range parameter
The date and time on which the parameter was last updated
The value of the parameter
The login ID of the user who has last updated the parameter value
Any additional information about the parameter
The mode in which the parameter was last updated
The number of the transaction by which the parameter was last updated
If the parameter is updated by a formula, then the formula is displayed