|
|
|
|
|
This activity allows you to store details about the tank. A tank is a type of warehouse and is configured as zones in the system. The warehouses and zones are defined in the “Storage Administration” business component. Once the tank details are entered in this page, the corresponding zone is then converted into a tank.
The tanks have a unique process of item measurements. The details of the tank and its measurement units are defined in this activity. The stock in tanks can be measured using three modes, namely, level, volume or weight. Other information pertaining to the tank, such as the unit of measurement of the stock in the tank, the minimum and maximum values the tank can hold can be specified.
Select the “Tank Information” link under the “Continuous Process Model“ business component.
The “Tank Information” page appears.
Enter the following detail in the header:
|
Warehouse |
Use the drop-down list box to select the warehouse. The system populates all the values of warehouse defined in the “Storage Administration” business component. |
|
Warehouse Type |
Use the drop-down list box to select the type of warehouse. You can select “Tank” or “sphere”. The system displays “Tank” by default on launch of the page. |
|
Tare Weight |
The tare weight of the tank. |
|
UOM |
The unit of measurement of the stock in the tank (Alphanumeric, 15). |
|
Help facility available. |
The system retrieves and displays the following details in the “Tank Details” multiline:
Enter the following details in the multiline:
|
Zone |
The code identifying the zone (Alphanumeric, 10). |
|
Help facility available. | |
|
Data Collection Mode |
Use the drop-down list box to select the mode of data collection. You can select from “Level”, “Volume” and “Weight”. The system displays “Level” by default on launch of the page. |
|
Measurement Type |
Use the drop-down list box to indicate the how the stock in the tank is measured. You can select “Manual” or “DCS”. The system displays “Manual” by default on launch of the page. |
|
UOM |
The unit of measurement of the stock in the tank (Alphanumeric, 15). |
|
Help facility available. | |
|
Calibration Chart Required |
Use the drop-down list box to indicate whether calibration chart is required. You can select “Manual” or “DCS”. The system displays “Manual” by default on launch of the page. |
|
Min Volume |
The minimum volume of stock that the tank can store (Integer). |
|
Max Volume |
The maximum volume of stock that the tank can store (Integer). |
|
Volume UOM |
The unit of measurement by which the volume of the tank is determined (Alphanumeric, 15). |
|
Help facility available. | |
|
Floating Roof |
Use the drop-down list box to indicate whether floating roof is required. You can select “Yes” or “No”. The system displays “Yes” by default on launch of the page. |
|
Floating Roof Correction Factor |
The value indicating the correction factor for floating roof (Integer). Enter value in this field, only if the floating roof is set to “Yes”. |
Click the “Maintain Tank Information” pushbutton to save the tank details.
Click the “Delete Tank Information” pushbutton to delete the tank details.
The system displays the following details.
|
Created By |
The login id of the user who created the tank calibration information. |
|
Created Date |
The date on which the tank calibration information was created. |
|
Modified By |
The login id of the user who last modified the tank calibration information. |
|
Modified Date |
The date on which the tank calibration information was last modified. |
