|
|
|
|
|
|
This page allows you to attach inspection points to the parameters of the equipment. Tell me more.
Select the “Attach Inspection Points” link at the bottom of the “Equipment Parameter” page.
The “Attach Inspection Points” page appears.
The system displays the following field:
|
Eqp. |
The equipment for which inspection points must be attached. |
|
The description of the equipment is displayed alongside. |
|
|
Zoom facility available. |
Enter the following field:
|
Parameter |
Use the drop-down list box to select the parameter to which inspection points must be attached. The system lists all the parameters that are of type “Range” and “Attribute”, attached to the equipment. The description of the parameter is displayed alongside. Zoom facility available. |
Enter the following fields in the “Inspection Points” multiline:
|
Inspection Point |
The inspection point to be attached to the parameter of the equipment (Alphanumeric, 30). Ensure that the inspection point is already defined in the “Create Inspection Point” activity and is in “Active” status. Also ensure that the inspection point is unique for the equipment – parameter combination. |
|
Press <Enter>. The system retrieves the “Description” field in the multiline. |
The system displays the following field in the multiline:
|
Desc. |
The description of the inspection point. |
Enter the following field in the multiline:
|
Present Value |
The current value of the parameter on the inspection point (Alphanumeric, 30). Ensure that a numeric value is entered in this field, if the parameter is of type “Range”. |
|
|
|
|
Date |
The date on which the present vale is recorded (Date Format). Ensure that the date is not later than the current date. Also ensure that the date is not earlier that the installation date of the equipment. |
|
Time |
The time at which the present value is recorded (Time Format). |
|
Remarks |
Any additional information about the inspection point attached to the parameter. |
Check the box in the “Select” column of the multiline, to select the inspection points that you do not wish to attach to the parameter.
Click the Delete icon in the tool bar above the multiline, to delete the selected inspection point(s).
Click the “Attach Inspection Points” pushbutton, to attach inspection points to the parameter.
The system displays the following fields in the “Record Statistics” group box:
|
Created By |
The login ID of the user who attached the inspection points to the parameter. |
|
Created Date |
The date and time at which the inspection points are attached. |
Specifying inspection points for equipment – parameter combination – An overview
An inspection point is the physical point on the equipment, where the performance of the equipment is monitored with the help of parameters. The equipment can have more than one parameters whose values can be monitored on more than one inspection point. Inspection points are defined for the equipment – parameter combination. The parameter, for which the inspection point is attached, must be of type “Range“ or “Attribute”.
You can attach inspection points to the parameter by specifying the inspection point, the value of the parameter on the inspection as on a specified date and time, and any additional information about the inspection point being attached to the parameter.
The system attaches the inspection points and records the login ID of the user who attached the inspection point along with the date and time at which the inspection point is being attached.
Create Inspection Point
Attach inspection points to the parameters of an equipment
Attach inspection points to the parameters of an equipment
An inspection point is the physical point on the equipment, where the performance of the equipment is monitored with the help of parameters. You can attach inspection points to the parameters of the equipment in this page.
Enter the inspection point to be attached in the “Inspection Point” field in the multiline.
Click the “Attach Inspection Points” pushbutton to attach the inspection point to the equipment – parameter combination.