Re-defining the inspection points for equipment

This page allows you to attach inspection points to the parameters of the equipment. Tell me more.

Select the “Inspection Point” at the bottom of the “Equipment Parameter” page.

The “Equipment Inspection Points” page appears.

Enter the following field, if you wish to attach inspection points to the parameters of an equipment other than the equipment selected in the previous page:

Eqp.	The equipment for which inspection points must be attached (Alphanumeric, 30).
	Press <Enter>. The system fills in the “Parameter” field with all the parameters that are attached to the equipment and which are of type “Range” and “Attribute”. The description of the equipment is displayed alongside.
	Zoom facility available.
Parameter	Use the drop-down list box to select the parameter to which inspection points must be attached. The system lists all the parameters that are attached to the equipment, which are in the “Active” status, and which are of type “Range” and “Attribute”.
	The description of the parameter is displayed alongside.
.	Zoom facility available

The system displays the following fields in the “Already Attached Inspection Point” multiline:

Inspection Point	The inspection point attached to the parameter of the equipment.
Desc.	The description of the inspection point.
Present Value	The present value of the parameter on the inspection point on a specific date and time.
Date	The date on which the present value is recorded (Date Format). Ensure that the date is not later than the current date. Also ensure that the date is not earlier that the installation date of the equipment.
Time	The time at which the present value is recorded (Time Format).

Enter the following field in the “Already Attached” multiline:

Remarks

Any additional information about the inspection point is attached to the parameter (Alphanumeric, 255).

Check the box in the “Select” column of the multiline, to select the inspection points that you wish to delete from the parameter.
Click the Delete icon in the tool bar above the multiline, to delete the selected inspection point.

Note: The system does not allow you to delete an existing inspection point, if values are already recorded for the parameter on the inspection point.

Enter the following fields in the “New Inspection Point” multiline:

Inspection Point	The inspection point to be attached to the parameter of the equipment (Alphanumeric, 30). Ensure that the inspection point is already defined in the “Create Inspection Point” activity and is in “Active” status. Also ensure that the inspection point is unique for the equipment – parameter combination.
	Help facility available
	Press <Enter>. The system retrieves the “Description” field in the multiline.

The system displays the following field in the multiline:

Desc.

The description of the inspection point.

Enter the following field in the multiline:

Present Value	The current value of the parameter on the inspection point (Alphanumeric, 30). Ensure that a numeric value is entered in this field, if the parameter is of type “Range”.
	Help facility available
Date	The date on which the present value is recorded (Date Format). Ensure that the date is not later than the current date. Also ensure that the date is not earlier that the installation date of the equipment.
Time	The time at which the present value is recorded (Time Format).
Remarks	Any additional information about the inspection point is attached to the parameter (Alphanumeric, 255).

Check the box in the “Select” column of the multiline, to select the inspection points that you do not wish to attach to the parameter.
Click the Delete icon in the tool bar above the multiline, to delete the selected inspection point.
Click the “Edit” pushbutton, to attach inspection points to the parameter.

The system displays the following fields in the “Record Statistics” group box:

Created By	The login ID of the user who created the equipment.
Created Date	The date and time on which the equipment was created.
Last Modified By	The login ID of the user who last modified the equipment.
Last Modified Date	The date and time on which the equipment was last modified.

Redefining the inspection points for equipment – parameter combination – An overview

An inspection point is the physical point on the equipment, where the performance of the equipment is monitored with the help of parameters. The equipment can have more than one parameter, which can be inspected on more than one inspection point. Inspection points are defined for the equipment – parameter combination. The parameter for which the inspection point is attached must be of type “Range “ or “Attribute”.

The system displays the inspection points that are already attached to the parameter. You can attach new inspection points to the parameter by specifying the inspection point, the value of the parameter on the inspection as on a specified date and time and any additional information about the inspection point being attached to the parameter.

You can also delete an inspection point from the parameter. The system allows you to delete an inspection point only if parameter values are not already recorded on the inspection point.

Prerequisite

Create Inspection Point.

What you can do in this page

Re-define inspection points that are attached to the parameters of an equipment

The system displays the inspection points that are already attached to the parameters of the equipment in this page. You can delete the existing inspection points or add more inspection points.

Enter the inspection point to be attached in the “Inspection Point” field in the multiline.
Click the “Edit” pushbutton to attach the inspection point to the equipment – parameter combination.