|
|
|
|
In this page, you can view the inspection points attached to the parameters of an equipment selected in the main page. Tell me more.
Select the “Inspection Point link from the bottom of the “Equipment Parameter” page.
The “Equipment Inspection Points” page appears.
If you wish to view the inspection points for an equipment other than the equipment selected in the main page, enter the following field:
|
Eqp. |
The equipment for which you wish to view the inspection points (Alphanumeric, 30). |
|
Press <Enter>. The system fills in the “Parameter” field with all its parameters. The description of the equipment is displayed alongside. |
|
|
Zoom facility available. |
|
|
Parameter |
Use the drop-down list box to select the parameter whose inspection points you wish to view. The system fills in this field all the parameters that are attached to the equipment, which are in the “Active” status and which are of type “Range” and “Attribute”. |
|
The description of the parameter is displayed alongside. |
|
|
Zoom facility available. |
The system displays the following fields in the “Inspection Point” multiline:
|
Inspection Point |
The inspection point attached to the parameter of the equipment. |
|
Desc. |
The description of the inspection point. |
|
Present Value |
The present value of the parameter on the inspection point on a specific date and time. |
|
Date |
The date on which the present vale is recorded. |
|
Time |
The time at which the present value is recorded. |
|
Remarks |
Any additional information entered for the inspection point. |
The system displays the following fields in the “Record Statistics” group box:
|
Created By |
The log – in ID of the user who created the equipment. |
|
Created Date |
The date and time on which the equipment was created. |
|
Last Modified By |
The log – in ID of the user who last modified the equipment. |
|
Last Modified Date |
The date and time on which the equipment was last modified. |
Viewing the inspection points of equipment parameters – An overview
An inspection point refers to the physical location on the equipment where the performance of the equipment is monitored based on certain measures. There can be many inspection points for single equipment. For example, you can define many inspection points on the equipment to monitor the vibrations of the equipment.
You can view the inspection points attached to the parameters of an equipment selected in the main page. You can also directly enter equipment other than the equipment selected in the main page, and view the inspection points defined for its parameters. The system displays the inspection point description, the present value of the parameter on the inspection point as on a date and time and any other additional information entered for the inspection point.