|
|
|
|
This page allows you to define fixed timings for updating the parameter values. Tell me more.
Select the “Fixed Time Schedules” link from the bottom of the “Configure RTI Updates” page.
The “Fixed Time Schedule” page appears.
The system displays the following fields:
|
Update On |
The maintainable object on which the parameter value must be updated. The system displays either “Equipment” or “Location”. |
|
Code |
The equipment or location for which the parameter value must be updated. |
|
|
Zoom facility available. |
|
Parameter |
The parameter for which the value must be updated. |
|
Inspection Point |
The inspection point on the equipment or location on which the parameter value must be updated. |
Enter the following fields in the "Fixed Time Sch." multiline:
|
Time |
Use the drop-down list box to select the time for which the parameter value must be updated. The system fills in this field with the time periods that are pre-set. |
|
Remarks |
Any additional information regarding updation of the parameter value at the fixed time (Alphanumeric, 255). |
Check the box in the “Select” column of the multiline to mark the timings for deletion.
Click the Delete icon in the toolbar above the multiline to delete the selected timings.
Click the “Update” pushbutton.
Defining fixed timings for parameter updation through RTI – An overview
This page allows you to define fixed timings for updating the parameter values. You can select the timings that have already been pre-set. You can also enter any additional information regarding updating parameter values during the fixed timings. The system updates the parameter values of the equipment or location from the RTI during the specified timings.